Vise soft jaw strips in three lengths; 63mm, 100mm and 120mm
All versions contain holes on the back to accomodate for rare earth magnets (5mm dia, 2mm thick)
Print preferrably in ABS because of strength.
Also use an minimum infill percentage of 50% and enough brim to ensure no warping (i use 40 a line brim)
| vise_jaw_plate_100mm.skp | 1.1MB | |
| vise_jaw_plate_100mm.stl | 14.5KB | |
| vise_jaw_plate_120mm.skp | 1.1MB | |
| vise_jaw_plate_120mm.stl | 14.5KB | |
| vise_jaw_strip_63mm.stl | 25.1KB |
