This is a simple as can be vinyl wall mount. Going on either corner of the vinyl; it allows for a flat wall mount that is secure while also being easy to release. In order to release, simply bend the restraining tabs out of the way of the vinyl, allowing it to be removed.

===================================================================
FOR INSTALL:

Find suitable screws. The recessed portion designed to contain the head of the screw is 6mm in diameter with 2mm of depth.

===================================================================

In terms of a mounting guide, you can either place the mounts on either corner of a spare sleeve and trace the outline of the corner pieces themselves, then later aligning them to the markings you made and then marking where the screw hole sits.

                 OR

You can mark the locations of the holes using the image with dimensions that will help position the holes for the screws. Note that these dimensions are in mm. (metric FTW)

NOTE: When installing, whether you decide to do lower left upper right or vice versa; you must ensure that the mount you place at the bottom as its tab along the side of the vinyl and that the vinyl does not sit on the flexible tab portion.

===================================================================

Once mounted, simply bend open the tabs and place the vinyl inside.