Vintage Wild Willy Body 3D Printer Model
The file 'Vintage Wild Willy Body 3D Printer Model' is (stl,step) file type, size is 6.5MB.
The file 'Vintage Wild Willy Body 3D Printer Model' is (stl,step) file type, size is 6.5MB.
Fully 3D printable Body for the Vintage Wild Willy.
For the Rollcage you´ll need M4 threaded rod, you may have to drill the holes out.
Just glue the M4 rod in to the cage parts.
| Body_Base.stl | 2.8MB | |
| Body_Base_1.stl | 2.8MB | |
| Cage_Front_Bar.stl | 264.8KB | |
| Dashboard.stl | 571.3KB | |
| Fire_Extinguisher.stl | 710.9KB | |
| Front_Cage_Frame_2x_windshield.stl | 538.5KB | |
| Gas_canister.stl | 290.2KB | |
| Grill.stl | 409.3KB | |
| Left_brace.stl | 417.8KB | |
| Left_brace_clip.stl | 149.3KB | |
| Light_2x.stl | 817.1KB | |
| Post_Front_Cage_2x.stl | 208.4KB | |
| Radiator.stl | 240.5KB | |
| Rear_Panel.stl | 636.9KB | |
| Right_brace.stl | 206.6KB | |
| Right_brace_clip.stl | 145.6KB | |
| Shifter.stl | 521.1KB | |
| Side_bar_cage_2x.stl | 511.5KB | |
| Side_Bar_left.stl | 180.9KB | |
| Side_Bar_Left_clamp.stl | 117.9KB | |
| Side_Bar_Right.stl | 180.9KB | |
| Side_Bar_Right_clamp.stl | 117.9KB | |
| Spare_Tire_Front.stl | 166.3KB | |
| Spare_Tire_Rear.stl | 174.7KB | |
| Steering_Wheel.stl | 1.1MB | |
| Top_Brace_Rear_Cage.stl | 221.9KB | |
| Wheel_Well_left.stl | 81.5KB | |
| Wheel_Well_right.stl | 82.7KB | |
| WildWilly_Alles.step | 6.9MB | |
| WILD_WILLY_BODY_.step | 6.9MB | |
| Windshield_Frame.stl | 382.1KB |
