Vintage Railcar 3D Printer Model Free Download

Description Files (31)

Summary

This was just a short and fun project I designed and built for my Dad.

While the model is more or less a Ford Model T it is not exact and not to any particular scale.

This model is about 150mm long and is designed to fit a track with 36mm between the inside surfaces of the two rails. In other words it is compatible with most of my other rail-mounted models.

There are a few non-printed things you will need to complete it. These are;

Some fine wire for the two stays from the front of the canopy to the headlight supports
Some ice-block sticks for the wooden crate on the back.
Some Ø4mm dowel for the axles and locator pins
Some Ø3mm dowel (or kebab stick) for the steering wheel column. Seeing as it is a train and does not need a steering wheel you may choose to ignore this bit.
Some thin clear plastic sheet for the windscreen.
Some relatively thick wire for the canopy frame (if you are making the canopy). I used TIG welding wire which is about Ø1mm diameter.
Some tissue paper – not fancy tissue paper either. This is for the canopy.
Some heavy(ish) insulated wire to model some pipes running from the front to the back.

You will find the model files are all of the format “Vintage_RailCarv6-Blahblahblahx2.stl” where the last bit is the number of that item you will need to print. You can expect a good size pile of pieces by the end of your printing session. None of the pieces require support, although some may benefit from a bit of work with a craft knife or file where some of the overhangs may droop for the first layer.

Assembly instructions are included in a pdf in the downloads for this project.

Have fun.

If you are looking for tracks to display it on, then have a look at these parametric track models. You will just need to set the track gauge to 36mm and sleeper length to 58mm to be compatible with this model.

Standard Straight Track https://www.thingiverse.com/thing:3400628
Standard Curve Track https://www.thingiverse.com/thing:3400642
OS-Railway Straight Track https://www.thingiverse.com/thing:3400784
OS-Railway Curved Track https://www.thingiverse.com/thing:3400779

VintageRailcar_Assembly_Instructions.pdf	3.9MB
Vintage_RailCarv6-BodyLightLx1.stl	91.9KB
Vintage_RailCarv6-BodyLightRx1.stl	91.5KB
Vintage_RailCarv6-Bodyx1.stl	181.2KB
Vintage_RailCarv6-BrakeShoePrx2.stl	7.1KB
Vintage_RailCarv6-BufferWebLx2.stl	19.3KB
Vintage_RailCarv6-BufferWebRx2.stl	19.3KB
Vintage_RailCarv6-Bufferx2.stl	131.8KB
Vintage_RailCarv6-FrontGrillex1.stl	200.2KB
Vintage_RailCarv6-FuelTankx1.stl	545.6KB
Vintage_RailCarv6-GuardSpanBackx1.stl	53.0KB
Vintage_RailCarv6-GuardSpanFrontx1.stl	53.0KB
Vintage_RailCarv6-JerryCanx1.stl	83.1KB
Vintage_RailCarv6-LeafSpringx4.stl	29.0KB
Vintage_RailCarv6-LowerCrossBarx2.stl	145.6KB
Vintage_RailCarv6-MotorDetailLBackx1.stl	162.6KB
Vintage_RailCarv6-MotorDetailLFrontx1.stl	162.6KB
Vintage_RailCarv6-MotorDetailLMidx1.stl	201.4KB
Vintage_RailCarv6-MotorDetailRx1.stl	320.9KB
Vintage_RailCarv6-NumberPlatex1.stl	88.6KB
Vintage_RailCarv6-RunningGuardsL.stl	105.4KB
Vintage_RailCarv6-RunningGuardsR.stl	105.6KB
Vintage_RailCarv6-Seatx1.stl	453.2KB
Vintage_RailCarv6-SideInnerDetailx4.stl	81.5KB
Vintage_RailCarv6-SidePanelLx1.stl	1.1MB
Vintage_RailCarv6-SidePanelRx1.stl	1.1MB
Vintage_RailCarv6-SteeringWheelx1.stl	236.7KB
Vintage_RailCarv6-Underframex1.stl	185.9KB
Vintage_RailCarv6-UpperCrossBarx2.stl	114.6KB
Vintage_RailCarv6-Wheelsx6.stl	151.3KB
Vintage_RailCarv6-WindscreenFramex1.stl	22.5KB

Vintage Railcar 3D Printer Model

Summary

Tags

You might also like