Vintage Folding Cigarette Box 3D Printer Model
The file 'Vintage Folding Cigarette Box 3D Printer Model' is (STL,STEP) file type, size is 1.5MB.
The file 'Vintage Folding Cigarette Box 3D Printer Model' is (STL,STEP) file type, size is 1.5MB.
Hello,
This is a cigarette case with movable shelves. Fill the chamber with sand or lead-like material, as the bottom part needs to be heavy. You will need glue to attach the hinge and bottom chamber.
Assembly order:
1) Fasten the shelves to each other with m2x8 screws as shown in the image. Then temporarily place it on the bottom plate.
2) Close the top cover and make sure that you bring it to a level where you can loosen the screws from both sides with the help of a screwdriver from the mounting hole.
3) Lift the cover, make your markings and glue the shelves to the bottom plate.
4) Attach the cover again and glue the hinge to the back, which you assembled with 2 flat head m2x15 screws.
5) Finally, close the cover and loosen the screws from both sides and place it on the channel.
6) Then you should glue the mass storage after filling it with something heavy like sand or lead.
| Bottom_plate.STL | 4.2KB | |
| Bracket_2_x4.STL | 422.5KB | |
| Bracket_x4.STL | 563.4KB | |
| Cigarette_box.STEP | 1.8MB | |
| Cover.STL | 1.2MB | |
| Hinge_x2.STL | 768.2KB | |
| Mass_storage.STL | 1.4KB | |
| shelf.STL | 1.6MB |
