A vintage carbon mic, used onstage. This is NOT a functional microphone - it is a prop. This has a threaded base, that screws on to a standard microphone stand (5/8"-27) and fits nicely. The front and back halves are glued together, and the ring is glued to the base. The springs were purchased at a hardware store. The whole thing was then painted. Modeled in Fusion 360.
| mic_back_v2.stl | 1.1MB | |
| mic_front_v2.stl | 2.1MB | |
| mic_ring_v2.stl | 1.2MB | |
| threaded_base.stl | 2.1MB |
