Village House 27 (typ B) – Shop (z-scale) 3D Printer Model
The file 'Village House 27 (typ B) – Shop (z-scale) 3D Printer Model' is (stl) file type, size is 15.63 KB.
The file 'Village House 27 (typ B) – Shop (z-scale) 3D Printer Model' is (stl) file type, size is 15.63 KB.
Village house 27 (typ B) - shop (z-scale)
This design is part of the series „Village house Typ B“: Front wall, rear wall and roof elements can be exchanged between all Village house Typ B designs (mirroring required to exchange front and rear wall elements).
Be aware, the picture shows a mirrored version!
Assembling:
Use transparent foil, cut to fit and glued on the inside of the wall elements, as glass in the windows. Be careful not to place the foils in areas where the walls connect!
I use 0,5mm transparent foil, clear or or slightly opaque, availably at stationary shops. Alternatively you can "upcycle" plastic packaging material from your groceries.
Paint to your taste and assemble as seen in the picture.
Printing:
Print the wall elements flat on the printing bed to allow the details printed without/few supports, base plate and roof with the lower side in the printing bed.
Mirror the elements in your printer software in case you need it in another orientation.
For n-scale use a scaling factor of 1,38 in your printer software.
| t091a_base_plate.stl |
| t091b_front_wall.stl |
| t091c_rear_wall.stl |
| t091d_roof.stl |
