Should print fine without supports.
The horn has quite thin walls, 2mm. I printed mine without infill, but set the "shell count" high enough to make the horn solid.
If printed at 100% size, it holds 0.5 liters.
| Drikkehorn-_bakfot.stl | 567.8KB | |
| Drikkehorn-_framfot.stl | 333.9KB | |
| Drikkehorn-_hale.stl | 10.4MB | |
| Drikkehorn-_horn_a.stl | 2.1MB | |
| Drikkehorn-_horn_b.stl | 2.3MB | |
| Drikkehorn-_horn_c.stl | 1.7MB | |
| Drikkehorn-_ring.stl | 757.7KB |
