3D Printer Models

Vidroc SQ11 Camera Mounts 3D Printer Model

Author: @Works-Of-Claye

License: CC BY

File formats: stl

Download type: zip

Size:1.0MB

The file 'Vidroc SQ11 Camera Mounts 3D Printer Model' is (stl) file type, size is 1.0MB.

Description Files (4)

Summary

Vidroc SQ11 camera mount

Update - Added a BT-50 nose cone mod for this camera. - You have to print the nose cone with supports.- Either glue or screw the camera mount into the notch in the nose coneSimple set of mounts that allow you to mount a [SQ11](https://www.amazon.com/s?k=SQ11&i=electronics&ref=nb_sb_noss_2) onto your airframe using either nylon straps or a countersink screw. The SQ11 is a remarkably small 1080p camera - a little of a pain to activate but once you get used to it, it's not so bad. (did I mention these are CHEAP, too?) The camera fits in VERY firmly but I included a small hole for a tiny set screw if you need to secure it more. (My prints are so firm I have to use a small flat tip screwdriver to pop the camera out)There is a small custom support you need to cut out after printing.

If you use this post you videos in the comments!!Here is the Fusion 360 file[Vidroc SQ11](https://a360.co/2J7tNpE)

Vidroc_SQ11_Camera_Mount_for_BT50.stl	482.8KB
Vidroc_SQ11_mount.stl	1.2MB
Vidroc_SQ11_Nose_Cone_for_BT50.stl	192.6KB
Vidroc_SQ11_Taper_lead.stl	943.2KB