Vidroc 808 BT-50 & 60 Nose Cone 3D Printer Model

License: CC BY
File formats: stl
Download type: zip
Size:1.3MB

The file 'Vidroc 808 BT-50 & 60 Nose Cone 3D Printer Model' is (stl) file type, size is 1.3MB.

Summary

Vidroc 808 BT-50 and BT-60 Nose Cone

This design makes it fairly simple to add an 808 Camera to your BT-50 or BT-60 based rocket.

  • The BT-50 version It takes advantage of the narrow body of the 808 and records the flight 'sideways'. The single hole version is for cameras that can record on power-up. The long hole version is for cameras that require two different buttons to be pushed to start recording.

I've tested this with a number of different 808 cameras and the fit is good, but I primarily designed it for the MateCam 808.

Features

  • 2mm hole in the tip for hanging the camera looking down during recovery.
  • Slot in the nose cone shoulder so you can run the nose tip shroud line into the airframe

When I print it, I put supports across the upper openings but you may be able to print it without doing that.

For the BT-60 you need to add supports for the camera mount base and will need a RC servo mounting screw to retain the camera in the mount.
Vidroc_808_BT-60.stl 1.4MB
Vidroc_808__BT-50_Long_Hole.stl 1011.8KB
Vidroc_808__BT-50_Single_Hole.stl 912.2KB