VIC-20-RAM+ROM-Expansion Cartridge Case. 3D Printer Model

Author: @
License: CC BY
File formats: bin,3mf,stl,scad
Download type: zip
Size:190.1KB

The file 'VIC-20-RAM+ROM-Expansion Cartridge Case. 3D Printer Model' is (bin,3mf,stl,scad) file type, size is 190.1KB.

Summary

This is a remix for the cartridge VIC-20-RAM+ROM-Expansion from Dikdom on Github, it gives you 4 rom slots (8k each) and up to 35k of RAM:

To be used with a disgnostic harness from Sven Petersen.

  • Moved the cartridge stops.
  • Reducer the slot for the board sticking out for a perfect fit.
  • Made room for the RAM if it is socketed.
  • Remove the indentation for cleaner print.
  • Added a window for Dip switches and jumper.
  • Added a window to access the ROM if socketed.
  • Reduced the chamfer of the outside edges for a better print.
  • Enlarge to 2.8mm the screw hole for easier threading of a M3 screw.

I have included the 3mf files form Prusa Slicer with painted support where needed for the clips...

I used a M3 3mm x 10mm screw.

romfilediagnostic_NTSC_and_PAL_+_2_games.bin 32.0KB
vic_cartridge-Frank-Dip+ROM.3mf 56.5KB
vic_cartridge-Frank-Dip+ROM.stl 406.9KB
vic_cartridge-Frank-Dip.3mf 55.5KB
vic_cartridge-Frank-Dip.stl 405.2KB
vic_cartridge_ROM-RAM-Cartridge-Frank.scad 16.5KB