Screwless vesa desk stand for monitor 100x100mm (can be remixed for bigger)
** Print at your own risk **
I used 5 lines of wall with 15¨% infill PLA.
Depend on direction of your print you must use suports or rafts.
In the midle, I used a 28.5 mm coat rack alluminiun tube (found in any home depot).
Can be remixed for bigger tubes.
Caution: The longer the tube, the larger the base must be
The model I made available, I used a 38cm tube.
| Base_suporte_monitor.stl | 10.7KB | |
| Suporte_Vesa_Monitor.stl | 55.0KB |
