VESA Mount PSU (Power SUpply) Holder 3D Printer Model
The file 'VESA Mount PSU (Power SUpply) Holder 3D Printer Model' is (stl) file type, size is 17.1KB.
The file 'VESA Mount PSU (Power SUpply) Holder 3D Printer Model' is (stl) file type, size is 17.1KB.
This design came out of a desire to tidy up some of our hot-desks. We were already printing the fabulous VESA Mount standoff by Bekar so I figured the easiest thing to do was to just remix that and "glue" a holder to it.
I designed it with a large side so that it can be printed vertically, and I enlarged the holes slightly as I found I needed to drill those out on the original VESA mount spacer.
We also use these to hold the PSU's for our MFF PC's as the VESA mounts we use for this don't hold the PSU's very nicely.
You'll want to use this with some velcro ties to hold the PSU to the mount, I've included chunky cooling slots to allow you to loop round them for a smaller PSU, or you can do as we do and loop it round vertically.
The model can be used either way up, and the side walls are about 5mm to allow for power inputs and outputs.
This is sized to hold the PSU from the i-Tec Triple Display USB-C 100w Dock which is our standard dock, but with slight adjustment you can hold whatever you want.
| Dock-MFF_PSU_VESA_Holder.stl | 93.6KB |
