Very Simple Foldable FPV Monitor Mount 3D Printer Model
The file 'Very Simple Foldable FPV Monitor Mount 3D Printer Model' is (stl) file type, size is 32.4KB.
The file 'Very Simple Foldable FPV Monitor Mount 3D Printer Model' is (stl) file type, size is 32.4KB.
This is a very simple and effectiveness foldable FPV monitor mount.
Initially it was designed to Fit my Devo 10 transmitter but it can be used on any transmitter with the same kind of Neck Strap adaptor.
The structure is very rigid. I strongly recommend to print the small parts with 100% infill to guarantee it will hold safely the transmitter and the monitor with the neckstrap attached. The arm can be printed with less filament (20%)
For the junctions I have used M8x35mm Screws with self locking nuts and washers between than to reduce attriction, for the the radio support one M4x20mm with a self locking nut and for the monitor I used one m5 screw removed from an old camera tripod.
| arm.stl | 195.2KB | |
| coupler.stl | 134.7KB | |
| holder.stl | 104.3KB |
