Vertical Velocity Indicator For Flight Simulator 3D Printer Model
The file 'Vertical Velocity Indicator For Flight Simulator 3D Printer Model' is (STL,pdf) file type, size is 149.7KB.
The file 'Vertical Velocity Indicator For Flight Simulator 3D Printer Model' is (STL,pdf) file type, size is 149.7KB.
This is a replica of a vertical velocity indicator as can be found in nearly all general aviation aircrafts.
It is designed to be used with one servo-motor (SG90 like)
The PDF is the background to be printed and glued to the front plate.
I will use it with an Arduino Uno. I plan on using it for DCS World through the use of DCS Bios.
To assemble the different parts you will need 4 M3 screws (M3x10mm), 4 M3 spacers (20mm) and 4 M3 nuts to attach the front face to the motor support. The servo-motor is attached using the M2 screws that came with it. You will also need a M2.5 screw to attach the servo gear (M2.5x5 mm) to the servo. The needle should be glued to the needle gear ONCE assembled with the front plate : the gear is on the back of the front plate, the needle on the other side.
| back_plate_VVI.STL | 257.4KB | |
| front_plate_VVI.STL | 61.5KB | |
| needle_gear.STL | 46.6KB | |
| needle_VVI.STL | 15.1KB | |
| servo_gear.STL | 63.8KB | |
| VVI.pdf | 38.8KB |
