Vertical planter that is vase-mode compliant (Except the base).
Printing with 0.6mm or 0.8mm nozzle is advised.
The duct is supposed to be pierced near to the ground to drain surplus water. You can use a wick, put through the duct, to water the plants from the reservoir (not tested yet to which height a wick is capable of drawing water to)
Latest Changes
31.01.2020
Added a hook for installation on a Ø 13 mm bar with M4 screws.
Added a more bulky version of planter_regular and planter_low for bigger plants (someone said to me the bulky ones look like a toilet bowl :/ let me know what you think of them, or which shape you think would be more advantageous) .
Reuploaded planter_regular (no change) to get the preview image oriented the right way, didn't worked out... if you know how to fix the previews please let me know.
28.01.2020
Reduced height of the bottom step on planter_regular and planter_low.
Reduced height of the recess on the base.
This should make it easier to glue the parts together.
| Base.stl |
| hook.stl |
| Planter_low.stl |
| Planter_low_bulky.stl |
| Planter_regular.stl |
| Planter_regular_bulky.stl |
| reservoir.stl |
