Vertical Holder For Small Fire Extinguishers 3D Printer Model
The file 'Vertical Holder For Small Fire Extinguishers 3D Printer Model' is (stl) file type, size is 3.3MB.
The file 'Vertical Holder For Small Fire Extinguishers 3D Printer Model' is (stl) file type, size is 3.3MB.
Check out my other designs for expedition vehicles and camper vans.
Stable vertical mounting for a quick-grab small fire extinguisher (maximum diameter 110 mm) in the motorhome or caravan. A standing position is provided.
The bracket is two-part to be as flexible as possible and adapt to the conditions in the motorhome. The fire extinguisher is inserted into the holder from above and holds there on its own.
The bracket is very stable and has proven itself even on bumpy gravel roads.
I have also constructed a horizontal holder for this type of fire extinguisher in which the fire extinguisher lies flat: https://www.thingiverse.com/thing:4800431
and for smaller fire extinguishers with a diameter of 70 mm: https://www.thingiverse.com/thing:6486962
Material
*these are Amazon Affiliate Links. I would be very happy if youa re using them to support my work indirectly.
Visit my website for more information: www.science-feles.de.
I would be very happy about a Tip.
Ceterum censeo martem esse abeundum.
| Getraenkehalter_Feuerloescher_Senkrecht1.stl | 5.9MB | |
| Getraenkehalter_Feuerloescher_Senkrecht2.stl | 5.9MB |
