This is storage box system, that can be mounted vertically on a flat surface, i. e. a door or something like that. In my case, it is mounted on the inside of the door of a sewing table.
See the CAD screenshot for all parts.
Regarding the german file names: "Schale"=shell, "Einsatz"=insert
Optional:
If you only want to use the "Schale.." parts in combination with "Einsatz" parts, you can use the "Schale voll/halb nur Einsatz" parts and save some filament and print time. (Thanks to pumikachu for the hint :-))
The "Einsatz..." parts are removable boxes which fit nicely into the "Schale..." parts.
If you print more than one of the "Schale..." parts, you need a "Steckverbinder" part additionally.
If you print many "Schale..." parts to be connected, consider printing additional "Haltering" parts. This will help stabilizing the whole stacked tower when mounting on a surface.
| Einsatz_halb.stl | 290.0KB | |
| Einsatz_halb_unterteilt.stl | 298.0KB | |
| Einsatz_voll.stl | 452.2KB | |
| Einsatz_voll_geteilt.stl | 738.3KB | |
| Einsatz_zweidrittel.stl | 582.0KB | |
| Haltering.stl | 2.8MB | |
| Kappe_oben.stl | 4.3MB | |
| Kappe_unten.stl | 5.2MB | |
| Schale_halb.stl | 3.4MB | |
| Schale_halb_nur_Einsatz.stl | 1.4MB | |
| Schale_voll.stl | 4.4MB | |
| Schale_voll_nur_Einsatz.stl | 1.8MB | |
| Schale_zweidrittel.stl | 4.5MB | |
| Spacer.stl | 5.0MB | |
| Spacer_halb.stl | 5.6MB | |
| Steckverbinder.stl | 4.7MB | |
| Träger_halb.stl | 3.7MB | |
| Träger_voll_mit_Loch.stl | 7.3MB |
