Vernier Kidwinds Motor Mount 3D Printer Model
The file 'Vernier Kidwinds Motor Mount 3D Printer Model' is (stl) file type, size is 8.5KB.
The file 'Vernier Kidwinds Motor Mount 3D Printer Model' is (stl) file type, size is 8.5KB.
I bought this packet (http://www.rhombus.be/contents/nl/p1809_Basic_Turbine_Building_Parts.html) to experiment with wind power. It contains out a generator, mounting for the windmill wings and sticks to hold the wings. You can buy a base with it, i prefer to engineer it mystelf.
you need
1x motormount
3x bottom
3x verhoging for the height
If you want to go higher you can use koppelstuk to attach 2 x verhoging together.
The couplings are not a tight fit so i use a polymer glue to attach the parts together.
The reason that larger parts are in seperate pieces is because i use the hobby printer Vertex K8600 that prints in a volume of 8x8x8cm
I only need to attach the bottom pieces to a heavy surface and shorten the wooden sticks a little bit and then constructing wings for it to test out the effeciency. I used 2 middle pieces together it all depends on how large your wing design is.
| kidwinds_motormount.stl | 35.6KB | |
| kidwinds_motormount_bottom.stl | 74.6KB | |
| koppelstuk_kidwinds.stl | 1.7KB | |
| verhoging_kidwinds.stl | 6.6KB |
