Venturi Tube With 1/2’’, 3/4” And 1” Thread 3D Printer Model
The file 'Venturi Tube With 1/2’’, 3/4” And 1” Thread 3D Printer Model' is (3mf,stl) file type, size is 5.0MB.
The file 'Venturi Tube With 1/2’’, 3/4” And 1” Thread 3D Printer Model' is (3mf,stl) file type, size is 5.0MB.
Venturi tube with 1/2’’ thread.
This is a Venturi tube that I designed for my cold plunge in order to inject ozone to the water and keep it clean. The main difference is that the profile section is optimized to allow the maximum water flow and be strong enough to inject ozone.
The comercial Venturi tubes reduce much of the water flow and stress my pump and filter, reducing the life time of the pump and the filter. I was able to extend my filters by 6 months compared to the 3 weeks useful life they previously had.
You can donate to my cause in the follow link:
| Venturi_12_V3.3mf | 819.7KB | |
| Venturi_12_V3.stl | 2.4MB | |
| Venturi_1_V2.3mf | 675.6KB | |
| Venturi_1_V2.stl | 1.9MB | |
| Venturi_3_4_V3.3mf | 575.2KB | |
| Venturi_3_4_V3.stl | 1.7MB |
![Venturi Nozzle For Aquarium [reworked] 3D Printer Model](https://cdn.3axis.co/assets/c6/5c/e0/85/c65ce085-d806-4a1d-9bfc-802026a6b6c0/images/66e7c59e-55a6-49c0-803c-5ed02fb8924a_thumb.jpg)
