I've created a Ikea lack table coupling for my fan.
This will allowed you to fix the fan on the top of the table.
I flipped the part in Slic3r to be sure that the base is on the bottom.
You need to cut a 4.500'' hole on the top of the enclosure. The length is designed for the ''Ikea lack table enclosure''.
The second part for the ventilation outlet can be found here : https://www.thingiverse.com/thing:2409963
Fan used : AC Infinity AXIAL 1225, Muffin Cooling Fan, 115V AC 120mm by 120mm by 25mm Low Speed
https://www.amazon.com/dp/B009OWVUJ0?ref=emc_b_5_t
Tool used to cut the hole : 4-1/2 in. Hole Dozer Hole Saw
http://www.homedepot.com/p/Milwaukee-4-1-2-in-Hole-Dozer-Hole-Saw-49-56-9649/202327764
Enjoy and keep printing !!!
Edit (2017-09-11)
Added the part ''Vent Fan (Thick 0_75 inch)'' for a 3/4'' plywood @crogers1975 asked me.
| Vent_Fan.STL | 5.4MB | |
| Vent_FanV2.STEP | 55.9KB | |
| Vent_Fan_Thick_0_75_inch.STL | 1.8MB |
