Vent Cover 3D Printer Model
The file 'Vent Cover 3D Printer Model' is (stl) file type, size is 1.1MB.
The file 'Vent Cover 3D Printer Model' is (stl) file type, size is 1.1MB.
This item is made from fustarion and designed to fit over most vents I’ve encountered. Its initial purpose was to redirect air away from my face while sleeping, as I couldn’t modify the vent in a rental property. Later, I adapted it for my resin 3D printer to direct airflow toward a window by using two of these—one on the window and one on a fan, connected by an air duct. For this setup, the connectors were different, and I may consider releasing the design after further fine-tuning if there’s interest.
1 x Vent Cover All Parts.stl (Designed for a larger printer and was printed on an Anycubic Mega X)
1 x Vent Cover Left.stl
1 x Vent Cover Right.stl
1 x Vent Cover Top.stl
2 x Vent Cover Screw and Nut.stl (If a part doesn’t print right there are other part for Screw and Nut Label as such)
| Vent_Cover_All_Parts.stl | 1.6MB | |
| Vent_Cover_Left.stl | 20.6KB | |
| Vent_Cover_Nut.stl | 199.4KB | |
| Vent_Cover_Right.stl | 28.6KB | |
| Vent_Cover_Screw.stl | 287.3KB | |
| Vent_Cover_Screw_and_Nut.stl | 683.6KB | |
| Vent_Cover_Top.stl | 247.8KB |
