VENOM V2 3D Printer 3D Printer Model
The file 'VENOM V2 3D Printer 3D Printer Model' is (h,stl) file type, size is 124.9KB.
The file 'VENOM V2 3D Printer 3D Printer Model' is (h,stl) file type, size is 124.9KB.
The VENOM V2 is a 2020 extrusion based 3d printer.
Designed to be highly customizable this printer has a light weight but sturdy frame.
Made from 4 500mm and 3 250mm 2020 extrusions.
It was designed in autodesk fusion 360.
marlin config and config adv files are included
The parts list is a work in progress.
Feel free to make suggestions.
4: 500mm t-slot aluminum extrusions
3: 250mm t-slot aluminum extrusions
10: 90 degree 2020 brackets
1: 220 x 220 heated bed (and whatever bed assembly you want i used one from an anet a8)
1: hotend (I used an e3d v6 clone but you can use any. If you change the carriage.)
1: carriage assembly of choice (The z rods and screws are compatible with anet X axis assembly such as this https://www.thingiverse.com/thing:2328353) (My setup is here https://www.thingiverse.com/thing:3622206)
5: nema 17 motors ( Wiring for them)
1: 2 meters of g2 belt
2: pulley and gear set (I used a 16 tooth gear.)
2: 350mm m8 threaded rods
2: m8 brass nuts
2: 2 linear bearings
4: 380mm m8 rods
2: 450mm m8 rods
2: m5 to m8 lead-screw couplers
3: end-stops with wiring
1: mainboard(I used a ramps 1.4 and put it in this https://www.thingiverse.com/thing:1640870)
1: lcd/SD reader of choice ( I used a full graphic lcd and put it in this https://www.thingiverse.com/thing:3383951)
34: m2 t-slot bolts
42: m2 10mm bolts
1: 12v dc power supply
| Configuration.h | 70.3KB | |
| Configuration_adv.h | 67.4KB | |
| yEndStopRod.stl | 28.3KB | |
| yMotor.stl | 92.2KB | |
| yPulley.stl | 30.9KB | |
| yRod.stl | 27.3KB | |
| zEndBolt.stl | 20.1KB | |
| zEndStop.stl | 39.1KB | |
| zMotor.stl | 72.7KB | |
| zRod.stl | 61.6KB |
