Here is my attempt at the symbiote from the scene where Venom emerges from Eddie's shoulder!
The width of the arm-hole is currently 15cm, so it may require scaling depending on your arm. Split versions are available, but if they are still too large for your print bed, please let me know and I can try and split them further.
I would recommend printing these files at a pretty low infill percentage, to try and keep it as lightweight as possible.
Good luck! :)
| VenomArmMountFull_V2.stl | 27.5MB | |
| VenomArmMount_1.stl | 1.3MB | |
| VenomArmMount_1a_PrusaMK3Splus_Hollow.stl | 298.0KB | |
| VenomArmMount_1b_PrusaMK3Splus_Hollow.stl | 506.7KB | |
| VenomArmMount_1c_PrusaMK3Splus_Hollow.stl | 358.9KB | |
| VenomArmMount_1d_PrusaMK3Splus_Hollow.stl | 301.4KB | |
| VenomArmMount_2.stl | 1.2MB | |
| VenomArmMount_3.stl | 1.9MB | |
| VenomArmMount_3_Hollow.stl | 2.2MB | |
| VenomArmMount_4.stl | 3.4MB | |
| VenomArmMount_4a_PrusaMK3Splus_Hollow.stl | 2.3MB | |
| VenomArmMount_4b_PrusaMK3Splus_Hollow.stl | 1.5MB | |
| VenomArmMount_4_Hollow.stl | 3.7MB | |
| VenomArmMount_5.stl | 3.0MB | |
| VenomArmMount_5a_PrusaMK3Splus_Hollow.stl | 1.9MB | |
| VenomArmMount_5b_PrusaMK3Splus_Hollow.stl | 1.4MB | |
| VenomArmMount_5_Hollow.stl | 3.2MB | |
| VenomArmMount_6.stl | 17.4MB | |
| VenomArmMount_6a_PrusaMK3Splus_Hollow.stl | 2.1MB | |
| VenomArmMount_6b_PrusaMK3Splus_Hollow.stl | 9.3MB | |
| VenomArmMount_6c_PrusaMK3Splus_Hollow.stl | 6.3MB |
