Vending Machine 3D Printer Model
The file 'Vending Machine 3D Printer Model' is (stl,iam) file type, size is 1.8MB.
The file 'Vending Machine 3D Printer Model' is (stl,iam) file type, size is 1.8MB.
you may need glu.
| 2Capsule_Refill_Lid_2.stl | 22.9KB | |
| 2_Coin_Recovery_Lid_lock.stl | 123.1KB | |
| 2_Inside_the_fixing_device.stl | 50.5KB | |
| 2_One-way_gear_2.stl | 37.7KB | |
| 2층_Two-story_pillar.stl | 41.9KB | |
| 3Capsule_Refill_Lid3.stl | 16.9KB | |
| Assembly.iam | 601.5KB | |
| Assembly.stl | 602.4KB | |
| capsule_female.stl | 1.3MB | |
| Capsule_Refill_Lid.stl | 1.6KB | |
| Central_axis.stl | 67.7KB | |
| Disc.stl | 298.6KB | |
| gear.stl | 80.7KB | |
| Iron_bars.stl | 16.9KB | |
| outside_the_fixing_device.stl | 85.5KB | |
| passage.stl | 7.9KB | |
| pillar.stl | 40.5KB | |
| Rotation_bar.stl | 60.8KB | |
| _500won.stl | 211.0KB | |
| _Capsule_Refill_Lid_lock.stl | 110.5KB | |
| _Disc_Fixing.stl | 34.8KB | |
| _floor.stl | 9.3KB | |
| _key.stl | 149.4KB | |
| _knob.stl | 76.3KB | |
| _One-way_gear.stl | 29.0KB | |
| _Quarter.stl | 95.8KB | |
| _Sizing_Device.stl | 41.5KB | |
| _The_body_back.stl | 2.4KB | |
| _The_body_front.stl | 106.3KB | |
| _The_body_side.stl | 684.0B | |
| _기둥_Exit_shaft.stl | 79.0KB | |
| _놈USA-quarter_.stl | 56.1KB | |
| _놈_KOREA-500won.stl | 56.1KB | |
| _동전KOREA-500won.stl | 21.6KB | |
| _동전USA-quarter.stl | 21.6KB | |
| _뚜껑2_Coin_Recovery_Lid2.stl | 88.9KB | |
| _뚜껑Coin_Recovery_Lid.stl | 6.7KB | |
| _뚜껑Outlet_Lid.stl | 212.0KB | |
| _방지Safety_devices.stl | 14.7KB | |
| _수capsule_male.stl | 1.5MB |
