These caps are designed to fit the ISO standard automotive valve stems used on most cars, light trucks and motorcycles.
Most should print without supports unless noted below.
I WOULD USE SUPPORTS ON THIS ONE JUST FOR HIS CHIN - EASY CLEANUP.
Due to the properties of different filaments and temperatures, etc, I recommend printing one to make sure it fits properly. You may have to scale up/down a tad. My test prints with PLA+ fit snugly with no adjustments.
I recommend printing at .15 line height due to the 32tpi on the threads.
If you want to see all the valve stems I have remixed:
https://tinyurl.com/qnd82kz
I have designed over 500 remixes of various types. If you want to search by the type, visit my profile: https://www.thingiverse.com/ToaKamate/about
Velociraptor-Cap.stl | 21.0MB |