Vault deck box for MTG commander, holds 100 cards.
Description
An MTG deck box designed with a latching two-part outer shell that is mechanically linked with gears. This deck box features a removable tray that will hold 100 double sleeved cards with a little extra space for tokens. There is a space on the inside for dice or other small accessories.
Notes:
• These parts have a nominal clearance of .20mm. This should work for most printers, but I recommend your printer to be properly calibrated for dimensional accuracy to insure proper fit.
• Read the assembly instructions carefully, it is possible to put this together incorrectly in several different ways, most of which will render it unusable.
Printing
You will need to print one of each of the parts with the exception of the following for a complete box.
2x Vault_deckbox_gear
2x Vault_deckbox_gear_pin
4x Vault_deckbox_rack
2x Vault_deckbox_shell (there are 2 other versions of this, one with an industrial truss pattern, and one with an artistic filigree pattern)
| Vault_deckbox_body.stl | 680.4KB | |
| Vault_deckbox_gear.stl | 941.1KB | |
| Vault_deckbox_gear_pin.stl | 427.3KB | |
| Vault_deckbox_inner_clip.stl | 244.6KB | |
| Vault_deckbox_latch_part1.stl | 278.0KB | |
| Vault_deckbox_latch_part2.stl | 212.2KB | |
| Vault_deckbox_latch_part3.stl | 194.2KB | |
| Vault_deckbox_latch_part4.stl | 770.8KB | |
| Vault_deckbox_outer_clip.stl | 669.2KB | |
| Vault_deckbox_rack.stl | 41.5KB | |
| Vault_deckbox_shell.stl | 528.8KB | |
| Vault_deckbox_shell_filigree.stl | 1.4MB | |
| Vault_deckbox_shell_truss.stl | 600.9KB | |
| Vault_deckbox_tray.stl | 320.2KB |
