Vault Boy With Sound Module 3D Printer Model
The file 'Vault Boy With Sound Module 3D Printer Model' is (stl) file type, size is 16.6MB.
The file 'Vault Boy With Sound Module 3D Printer Model' is (stl) file type, size is 16.6MB.
This is revised Vaultboy with sound module. I purchase this specific sound module to fit inside the base platform:
You would also need to craft a spring with a gauge wire. You coil it around the detonator handle. The Detonator handle needs to be inserted inside the detonator and the ring needs to be glued with an alowance of at least 10mm from the tip. As show in the image to the handle to prevent from coming off.Then, push the handle all the way from the inside and insert the spring. Finally, secure the play button(black) with the plug and glue.
If you would like to see the actual model, you can click on this link below:
https://youtu.be/UL5KDfxScSc?si=fiVsmCcmvS0nHnkK
Enjoy
| center.stl | 37.4KB | |
| Datonator_handle.stl | 64.5KB | |
| Detonator_handle_ring.stl | 25.1KB | |
| Dynamite.stl | 1.3MB | |
| lid.stl | 23.6KB | |
| plug_1.stl | 684.0B | |
| Vault-Tec_cylinder_Final.stl | 670.2KB | |
| Vault_Boy.stl | 30.7MB |
