I made this adapter to drop into the original battery tray and hold my 3s lipo stick packs securely. These batteries are a bit too long to sit flat in the original battery tray so this angles them up just enough. Designed to fit packs up to 36mm wide and 107mm long. I use Hilldow 2600 packs and Ovonic Air 2200 packs but there are a bunch of others that should work. Some post-print trimming may be needed depending on what motor you have, I had to snip a little off around the motor on mine. You may want to add some supports under the part of the ramp that sticks out past the main body.
| Ascender_battery_tray_adapter.stl | 8.0KB |
