This is yet another straining/draining station for resin vats. The STLs are for the plastic parts, the stand is made from a 1" 1/4 (actual dimension) square piece of wood, the base is a piece of plywood mounted on hot glue or epoxy. The plastic parts are:
1) the mount for the straining vat, slides up and down the post, secured by a large printable bolt.
2) modular vat brackets, there is a straight bracket and an angled bracket, the latter is angled so the vat leans forward few degrees. Both brackets come with a special version for Phrozen Transform vats (large vats with handles on top, the bracket has a cutout that accommodates the handle)
3) funnel holder
4 ) funnel holder mount, also slides up and down the post, and the holder slides in and out, the bolt secures both movements (bolts are the same, so you need to print two)
| Vat_Bracket_angled.stl | 6.1KB | |
| Vat_Bracket_angled_transform.stl | 6.8KB | |
| Vat_Bracket_bolt.stl | 468.1KB | |
| Vat_Bracket_funnel.stl | 18.1KB | |
| Vat_Bracket_funnel_mount.stl | 111.0KB | |
| Vat_Bracket_mount.stl | 110.5KB | |
| Vat_Bracket_straight.stl | 5.0KB | |
| Vat_Bracket_straight_transform.stl | 5.6KB |
