Some time ago I had designed a flexible vase and never posted it. I thought designing something similar would look good with dual color silk. So here they are. Four different versions. One 102mm and the rest 77mm. They all can be scaled. The bottom base is solid. They are intended to be printed as single wall models.
I used both eSun and Enisina dual color silk blue-green. The eSun green is a darker shade. Printed on both BL X1C and Prusa s3+.
60 degree bed temperature. 220 first layer temp, and 215 deg for all the rest of the layers.
I used both .2 and .16mm layers. Both .step and .stl files for each shape. Make sure to use at least 4 bottom layers after setting up spiral mode.
NOTE: It is fun to flex these, but be warned that overdoing it might cause cracking. These make good pen and pencil holders.
| vase--skind-finned-90tw-spiral.stl | 42.9MB | |
| vase--skind-finned-90tw-spiral.stp | 8.4MB | |
| vase-finned-45tw-spiral.stl | 6.4MB | |
| vase-finned-45tw-spiral.stp | 463.0KB | |
| vase-finned-90tw-spiral.stl | 10.6MB | |
| vase-finned-90tw-spiral.stp | 460.2KB | |
| vase-finned-straight-spiral.stl | 56.9KB | |
| vase-finned-straight-spiral.stp | 318.6KB |
