Variable Size Storage Box For 2020 2040 3030 4040 3D Printer Model
The file 'Variable Size Storage Box For 2020 2040 3030 4040 3D Printer Model' is (scad,stl) file type, size is 3.3KB.
The file 'Variable Size Storage Box For 2020 2040 3030 4040 3D Printer Model' is (scad,stl) file type, size is 3.3KB.
An OpenSCAD design for a shelf/box which will hang on box sections.
Inspired by https://www.thingiverse.com/thing:33285 but I wanted a different size, so I created a design that was customisable.
The STL included, and photographed, is just a little example, set for 20mm box (so good for 2020 or 2040). 60mm wide, 10mm high at the front and 25mm at the rear.
You can obviously make it much larger.
This is a work in progress and I'm bound to add things, but at the moment you can set:
boxsize - the width of the box section the rear has to reach over (I add 0.5mm in the code)
rearheight - The max height of the whole piece
frontheight - The height at the front
width - The width
depth - The depth of the front tray
I've enabled the MakerBot customizer on this design.
| printerbox.scad | 1.5KB | |
| printerbox.stl | 33.8KB |
