Variable PC Open Frame Motherboard Chassis 3D Printer Model
The file 'Variable PC Open Frame Motherboard Chassis 3D Printer Model' is (stl) file type, size is 1.7MB.
The file 'Variable PC Open Frame Motherboard Chassis 3D Printer Model' is (stl) file type, size is 1.7MB.
Open Frame for testing PC components
BOM:
all STL Elements printed once
4 5 mm rods each 320 mm long (I used CFK tubes, could be anything else what is strong enough)
3 M3x8 countersunk screws
3 M4x8 countersunk screws
8 Circuit board spacers (Nylon – I used Novoflex PCBW 64)
Rods are ore pinned to the holders - the Screws are only for Card Holder and I/O Holder
The holder needs to be printed with diagonal orientation on < 300 mm printers
Here is my short assemble video: https://youtu.be/okUVLjc9nt0
| Card-Holder.stl | 4.4MB | |
| IO-Holder.stl | 2.0MB | |
| Left-Frame.stl | 2.9MB | |
| Middel-Frame.stl | 2.6MB | |
| Right-Frame.stl | 2.6MB | |
| Rod-Interface-Card-Holder.stl | 2.9MB | |
| Rod-Interface-IO-Holder.stl | 686.0KB |
