UPD: STEP file added
For a true oldschool vapers only)
Wiring diagram is simplest for diy mech mods, it have no other elements except mosfet and resistor (10K works fine in mtl mode)
It is highly recommended to use silicon-coated soft wires (awg18 for high-amperage lines required)
Max battery amperage depends from coil resistance, use special tables to get right batteries
If u don’t have a standard 510 connector, u can use textolite plate instead (see photos), two 2.5 mm bolts and two melting nuts to mount the plate. The tank can be tightly screwed into central hole (6,5mm ID)
| 1.STL | 36.9MB | |
| 2.STL | 14.3MB | |
| 3.STL | 3.6MB | |
| Restyl3D_vape1.STEP | 1.3MB |
