Made for my aunt, a hair dresser, to store her scissors. Each drawer is about 18 x 8 x 2.75 cm (7x3x1 inch). It uses quite a bit of plastic, weighing in at just over 1/2 kg!
It is broken down into main parts and decorative veneers. The veneers I printed at 0.1 mm while the rest at 0.3 mm.
The drawers slide in from the back and will not fall out. The drawer veneer needs to be glued on with the drawer already installed in the chest. The back plate is not really needed.
| Back.stl | 684.0B | |
| Base.stl | 1.4KB | |
| Body.stl | 27.4KB | |
| box_1_v5.step | 8.6MB | |
| DrawerCover_x3.stl | 4.8MB | |
| DrawerPull_x3.stl | 2.0MB | |
| Drawer_x3.stl | 591.8KB | |
| SidePannel_x6.stl | 4.1MB | |
| Top.stl | 63.6KB |
