Vane Motor Generator 3D Printer Model
The file 'Vane Motor Generator 3D Printer Model' is (stl) file type, size is 1.1MB.
The file 'Vane Motor Generator 3D Printer Model' is (stl) file type, size is 1.1MB.
to finish this you will need 2 x bearing 22mm OD x 8mm ID by 7mm thick - a skate bearing and bit of 8mm rod about 30mm long some copper wire 0.2mm diameter and 24 neodymium magnets 1cm by 2mm circular you can find a video of the build here
https://youtu.be/DiNRHgMnfyo
| body.stl | 117.0KB | |
| cap.stl | 75.9KB | |
| coil_holder.stl | 2.1MB | |
| connection_plate.stl | 76.1KB | |
| magnet_holder.stl | 553.4KB | |
| rotor.stl | 96.7KB | |
| vane_x_4.stl | 10.2KB |
