Description Files (23)

Summary

Protocol 781-A Phantom

Before Printing

check if the part is on the right side
check if you have enough infill/perimeter
is your print bed big enough (20x20cm)? -> if not, rescale in your slicer

About The Project

This is my first really big 3D model. As a template I only had a 2D picture, because I wanted to get the model done before release (didn't work out). So don't see it as an exact replication, but as an adaptation to 3D printing. :)
...also the model became a little thicc

The new skin series of Valorant has fascinated me and so I decided to rebuild the Protocol 781-A Phantom skin in original size. The print time is expected to be in the neighborhood of 80 hours and will require at least about 700g of filament. The parts can be plugged together, but the model requires glue to hold everything together.

Important: The individual parts are designed for a print bed size of about 20 centimeters. I myself print at 90% size on my Prusa Mini+, so it should work on most printer sizes.

Print Settings

I recommend printing the model in 0.25mm layer height to get a good balance between quality and speed. In my case, I chose 4 perimeters and 10% infill. This makes the model particularly stable and has a good weight. Other values are of course also possible. Your printer should also be calibrated well enough, since the individual parts have about 0.3-0.5mm distance to each other.

You don't want it wide?

As I said, the model is not perfect and such far-reaching changes in Fusion unfortunately no longer work for me. One way to get a good scaling of the weapon is to reduce the thickness (y-height) to 50%.

BACK_-_Part_1.stl	770.9KB
BACK_-_Part_10-fixed.stl	807.8KB
BACK_-_Part_11.stl	1.5MB
BACK_-_Part_12.stl	164.3KB
BACK_-_Part_13.stl	598.6KB
BACK_-_Part_3.stl	266.2KB
BACK_-_Part_4.stl	674.0KB
BACK_-_Part_5.stl	513.7KB
BACK_-_Part_7-fixed.stl	340.2KB
BACK_-_Part_8.stl	546.4KB
FRONT_-_Part_1.stl	770.9KB
FRONT_-_Part_10.stl	807.8KB
FRONT_-_Part_11.stl	1.5MB
FRONT_-_Part_12.stl	164.3KB
FRONT_-_Part_13.stl	598.6KB
FRONT_-_Part_3.stl	266.2KB
FRONT_-_Part_4.stl	688.1KB
FRONT_-_Part_5.stl	513.7KB
FRONT_-_Part_7.stl	340.2KB
FRONT_-_Part_8.stl	546.4KB
Part_2.stl	52.0KB
Part_6.stl	146.6KB
Part_9.stl	2.0KB

Valorant Protocol 781-A Phantom 3D Printer Model