I give everyone permission to use these files free, for non-commercial use only, I just ask that you give me a shoutout and share your progress with me! Love seeing it.

If you've got questions feel free to contact me via twitter.

Update 2:

• Officially featured in Riot's community spotlight #4 https://playvalorant.com/en-us/news/announcements/community-spotlight-4/
• Added a non-deployed (holo_non_deployed.stl.) version of the sight for those not planning on using LEDs. Attaches to the rail the same way. No longer has room for mechanics.

Update 1:

• I've added _whole_rifle.stl as a reference for how all the pieces align together.

Notes:

• I used 8 6x2mm circular magnets to attach the sight to the top rail.
• The sight 'holder' is scaled by default to hold a 3mm piece of acrylic (or any other material) for the scope
• Though everything worked fine at .2 15% infil, I printed the foregrip.stl with 20% and an extra layer wall
• My print was entirely PLA

Currently in-progress:

• This was modeled with a good bit of finishing in mind as I intended to assemble it in my shop. I'm in the process of loosening the fit on some of the interlocking pieces.

Made and modeled this project after the release of the Valorant beta.

This is my first attempt at 3d modelling, and there are definitely some inaccuracies, but the file sits at about 39" long, and is scaled to print at full size. I will update this post in the future as I add more details, but for the now its a very accurate rebuild.

I assembled and finished the build on my stream over at https://www.twitch.tv/domtv