I made these out of spite because someone was trying to monetize theirs that was made from free files. These fit on vallejo paint caps and army painter speed paint caps.
meant for resin printing. I use my mars 2 and just use the normal settings I always use for stuff. You could print them flat on the plate or supported (supported files are included and have been tested to work)
| alien_topper.stl | 3.8MB | |
| alien_topper_supported.stl | 5.9MB | |
| cracked_earth_topper.stl | 2.9MB | |
| cracked_earth_topper_supported.stl | 5.0MB | |
| face_topper.stl | 3.1MB | |
| face_topper_supported.stl | 5.1MB | |
| industrial_topper.stl | 372.9KB | |
| industrial_topper_supported.stl | 2.5MB | |
| loose_cobblestone_topper.stl | 3.3MB | |
| loose_cobblestone_topper_supported.stl | 5.4MB | |
| loose_dirt_topper.stl | 1.5MB | |
| loose_dirt_topper_supported.stl | 3.8MB | |
| metal_grate_topper.stl | 2.8MB | |
| paving_stones_topper.stl | 770.2KB | |
| paving_stones_topper_supported.stl | 2.5MB | |
| paving_stone_topper_2.stl | 293.4KB | |
| paving_stone_topper_2_supported.stl | 2.3MB | |
| paving_stone_topper_3.stl | 1.4MB | |
| paving_stone_topper_3_supported.stl | 3.6MB | |
| roadway_topper.stl | 469.6KB | |
| roadway_topper_supported.stl | 2.5MB | |
| wooden_planks_topper.stl | 5.1MB | |
| wooden_planks_topper_supported.stl | 7.2MB | |
| worn_cobbles_topper.stl | 3.3MB | |
| worn_cobbles_topper_supported.stl | 5.3MB |
