Valken Airsoft Propane Adapter Protective Cover 3D Printer Model
The file 'Valken Airsoft Propane Adapter Protective Cover 3D Printer Model' is (STL) file type, size is 941.4KB.
The file 'Valken Airsoft Propane Adapter Protective Cover 3D Printer Model' is (STL) file type, size is 941.4KB.
Snap on protective cover for the Valken Propane Adapter for Green Gas Airsoft Magazines.
These things bend easy if you drop the bottle or bag the bottle without taking the adapter off.
Print with the opening facing up, flat side against the bed. All angles designed to print without supports.
Use something with some ductility, like PETG.
Update - 09/20/2024
Added a trimmed-down version of the safety cap that's a little harder to print - you'll likely want to use a small brim to help with adhesion if you're going to print several at a time.
Update - 10/01/2024
Changed the arms from a straight-cut design to a single-side helical cut. This makes the arm 5-8x stronger and increases the retention force considerably. This stops the breaking that the straight arms were prone to if print cooling was too high.
| Adapter_Cover_Full_Size.STL | 1.5MB | |
| Adapter_Cover_Smaller.STL | 724.1KB |
