Valentine’s Message 3D Printer Model
The file 'Valentine’s Message 3D Printer Model' is (stl) file type, size is 1.0MB.
The file 'Valentine’s Message 3D Printer Model' is (stl) file type, size is 1.0MB.
Use this envelope to deliver a (secret) Valentine's message of small gift to your loved one.
See the original model for printing instructions and more examples.
Additional printing instructions for the engraving:
For the color of the text and the button: change color at 0.8mm (layer 4). Text is 2 layers. With manual color change, set the skirt height to 4 or 5 to start printing the text after the color change without stuttering.
I added a 2nd design, this time with a rose for those who prefer something more chic. Change to green on the 4th layer and to red on the 5th layer.
note: For the smallest version it's best to print with a smaller nozzle for the details of the text and rose.
FilamentStories made a SHORT of the model!
* Due to the use of only 3 layers, it is important to guarantee the strength of these layers by printing at least 2 layers crosswise. Therefore I would not recommend using an infill pattern on the bottom layer as well.
| Envelope_Valentine_100x70.stl | 333.9KB | |
| Envelope_Valentine_155x111.stl | 399.2KB | |
| Envelope_Valentine_75x53.stl | 284.8KB | |
| Envelope_Valentine_rose_100x70.stl | 859.7KB | |
| Envelope_Valentine_rose_155x111.stl | 1010.2KB | |
| Envelope_Valentine_rose_75x53.stl | 761.6KB |
