VacuumCapacitorBracket 3D Printer Model
The file 'VacuumCapacitorBracket 3D Printer Model' is (123dx,stl) file type, size is 667.0KB.
The file 'VacuumCapacitorBracket 3D Printer Model' is (123dx,stl) file type, size is 667.0KB.
The bracket was designed to clamp a KP1-4 10-500pF 10kV variable vacuum capacitor together with the 22mm diameter ends of the copper tube from the loop.
The contacts of the capacitor are 60mm diameter. The cut-outs in the clamps are 24 and 62mm diameter because there is a 1mm thick strap of copper plate running around bouth the capacitor contact and the copper tube, to connect them.
Propably best to use PET as material.
see real thing on https://www.qrz.com/db/ON4AEG
| KP1-4_10-500pF_10kV_Lower_Bracket.123dx | 101.6KB | |
| KP1-4_10-500pF_10kV_Lower_Bracket.stl | 618.8KB | |
| KP1-4_10-500pF_10kV_Upper_Bracket.123dx | 110.1KB | |
| KP1-4_10-500pF_10kV_Upper_Bracket.stl | 447.1KB | |
| VacSupport.stl | 550.3KB |
