I made this tool for my vacuum cleaner, to "hoover" underneath the cupboards.
(To be honest, I wanted to avoid moving the cupboards everytime ;-)
It fits for vacuum cleaner connection diameter 35mm.
The hight of the mouth part is 16.8mm.
On or more extension parts are needed, depends on your cupboard depth.
I printed this with layer height of 0.244mm, 3 perimeters and infill of 30%, without support.
Please let me know your comments.
Update 2016_01_28:
The part "VacuumCleaner-nozzle_straight" is an alternative nozzle variant (straight).
You can use this instead of the original "VacuumCleaner-nozzle" (curved).
Another small modification for all parts: Orientation corrected to its target orientation for the build plate.
| VacuumCleaner-extension100.STL | 332.1KB | |
| VacuumCleaner-mouth.STL | 956.7KB | |
| VacuumCleaner-nozzle.STL | 3.2MB | |
| VacuumCleaner-nozzle_straight.STL | 1.9MB |
