V8 NOT-Air Engine Prototype 3D Printer Model
The file 'V8 NOT-Air Engine Prototype 3D Printer Model' is (STL) file type, size is 23.6MB.
The file 'V8 NOT-Air Engine Prototype 3D Printer Model' is (STL) file type, size is 23.6MB.
https://grabcad.com/library/turbo-v8-engine-1
Modified from "Turbo V8 Engine" by Enes DUMAN
hand-wind only
I want to design it like an air-powered motor but i was struggling with air-splitting mechanism
don't know how to design a compact, simple mechanism that works as cam+valve
*https://drive.google.com/open?id=0B-_Qsg7qZiCAamNveGY4MTRjMlU
This is the STEP file of the design. Please feel free to play with it!
| belt_wheel_big.STL | 359.6KB | |
| belt_wheel_small_x2.STL | 137.9KB | |
| bottom_cover.STL | 174.1KB | |
| cam_tip_x2.STL | 76.0KB | |
| cam_x2.STL | 163.8KB | |
| crank_asm_jig.STL | 83.1KB | |
| crank_pin_x3.STL | 44.8KB | |
| crank_unit_x4.STL | 75.3KB | |
| cylinder_block.STL | 2.5MB | |
| cylinder_head_x2.STL | 2.2MB | |
| exhaust_manifold_L.STL | 5.2MB | |
| exhaust_manifold_R.STL | 5.2MB | |
| G-8-MOD_engine_all.STL | 36.9MB | |
| intake_manifold.STL | 3.7MB | |
| main_bearing_x2.STL | 111.3KB | |
| output_gear.STL | 395.2KB | |
| output_tip_x2.STL | 48.5KB | |
| piston_rod_x8.STL | 348.3KB | |
| piston_x8.STL | 117.6KB | |
| valve_cap_x8.STL | 529.6KB | |
| valve_cover_x2.STL | 553.0KB | |
| valve_holder_x2.STL | 850.9KB | |
| valve_x8.STL | 380.6KB |
