V2 Balisong Trainer Knife UPDATED 3D Printer Model
The file 'V2 Balisong Trainer Knife UPDATED 3D Printer Model' is (stl) file type, size is 1.1 MB.
The file 'V2 Balisong Trainer Knife UPDATED 3D Printer Model' is (stl) file type, size is 1.1 MB.
This is a updated version of the V2 balisong trainer knife, which includes quite a few changes, big and small, and deserves to be in a new thing design.
I've firstly changed the confusing 4 latches and now made a more simple system for it, I have firstly increased the number of latches to 5, so that it has more customisability in terms of if you want a loose or tight latch, I secondly made it so that the sizes of the latches are more uniform, and less scattered in terms of sizes, here are the different thicknesses of the latches:
respectively configured as "(type of latch) = (pin height), (arm height)"
Tight latch = 3.6mm, 2.6mm
Kinda tight latch = 3.6mm, 2.4mm
Latch = 3.4mm, 2.4mm
Kinda loose latch = 3.4mm, 2.2mm
Loose latch = 3.2mm, 2.2mm
I also made a new hair comb design, which makes it so that it is slightly easier to print out with better adhesion for the hair comb tabs, and also made it so that the spacing between the hair comb tabs are bigger, to accommodate for people with thicker hair if they actually want to use it as a hair comb, this hair comb has BIG named after it.
I lastly made a new handle, which has all the same properties as the old handle, the only change is that I've included my name inside of the handle "ICEMAN", so for anyone who wants to sell my balisong knifes, but also want to support me while doing so, you can print these handles out to sell, make sure to DM me first.
Edit: i recognise that some people were struggling on how to install the latch, you will see in the handle that on one face of the inside of the handle, where you insert the latch, the surface should be flush with the rest of the handle, on the other side of the inside of the handle, there should be a little lip compared to the rest of the handle, you insert the latch with the pin facing the inside oif the handle where there is no lip, i hope that covers some confusion up, i have uploaded an image just to better demonstrate what i am telling.
| blade_7_v3_new.stl |
| clip_2_new.stl |
| hair_comb_blade.stl |
| hair_comb_blade_BIG.stl |
| handle_6_v3_new.stl |
| handle_6_v3_new_iceman.stl |
| latch.stl |
| Latch_Kinda_Loose.stl |
| Latch_Kinda_Tight.stl |
| Latch_Loose.stl |
| Latch_Tight.stl |
