V2.0 Prusa MMU2 Filament Storage Close To Wall 3D Printer Model Free Download

Description Files (23)

Summary

-edit- you can combine this design with flexible pivoting through-puts of https://www.thingiverse.com/thing:4902775

-EDIT- 31-10-2021 I designed support brackets for the 4mm PTFE tubes to support the filament exiting the dox. Choose variant "b" for parts 30, 31 and 32. It uses less filament, is easier to assemble and is stronger. Use two threaded rods M4 60mm and one one with length 95mm. See picture and CAD image how to assemble.

Apparently many people "liked" the version 1 box I uploaded.

This version is a slight improvement:

It uses a minimal amount of plastic.
Easier to mount spools.
Spools are better "fixed" in place, in fact you can now turn the box upside bown to get something out.
No pvc needed, instead it uses M8 threaded rods
runs on standard bearings, the ones Prusa delivers with their MMU2 upgrade: much less friction compared to V1, that used PVC tubing.

And.... Your Samla boxes are reused, just EXTRA holes in the sides, drilled with a jig / 3mm drill followed by a step drill bit.

The numbers of the parts denote where the part belongs to 00.... 10.. 20... 30... etc.
For each number you can use one of the variants denoted by "a, "b", "c" etc. The nX shows the amount of parts for one box.

See for the clever filament clips / caps: https://www.thingiverse.com/thing:3403370

edit - 30 jul 2023
Made the holders for the threads a bit stronger: parts 10 and 12.
Removed variant 11-b, 11-a is strongly recomended.

00_a_1X_DrillJig_15mm_V2.stl	186.0KB
00_b_1X_DrillJig_10mm_V2.stl	183.3KB
10_a_2X_AxisFillPiece.stl	529.6KB
11_a_4X_ShinedRingForfilament.stl	92.2KB
12_a_2X_AxisNut.stl	650.0KB
13_a_2X_AxisCap.stl	1.4MB
14_a_8X_BearingRollerNut.stl	328.3KB
15_a_8X_BearingNut.stl	518.6KB
20_a_4X_samla_inside_thoughput_10mm_pipe_thread_4mm_PTFE.stl	2.7MB
20_a_X_OPTIONAL_10mm_FESTO_replacer.stl	2.8MB
20_b_4X_samla_inside_thoughput_M6_4mm_PTFE.stl	781.9KB
20_c_4X_samla_inside_thoughput_M6_with_funnel.stl	773.2KB
21_a_4X_samla_outside_thoughput.stl	913.1KB
30_a_5X_AfstandHouder.stl	1.5MB
30_b_5X_Steun.stl	2.9MB
31_a_5X_AfstandHouderEind.stl	1005.1KB
31_b_10x_Support.stl	660.5KB
32_a_10X_AfstandhouderPoot.stl	618.0KB
32_b_10x_feet.stl	2.1MB
40_a_1X_MMU2FilamentTubeHolder_tiny.stl	1.7MB
40_b_1X_MMU2FilamentTubeHolder_small.stl	1.2MB
40_c_1X_MMU2FilamentTubeHolder_normal.stl	1.0MB
40_d_1X_MMU2FilamentTubeHolder_huge.stl	1.0MB

V2.0 Prusa MMU2 Filament Storage Close To Wall 3D Printer Model

Summary

Tags

You might also like