V2.0 Pocket Knife Fully Printable / Taschenmesser (for Righties) 3D Printer Model
The file 'V2.0 Pocket Knife Fully Printable / Taschenmesser (for Righties) 3D Printer Model' is (stl) file type, size is 994.0KB.
The file 'V2.0 Pocket Knife Fully Printable / Taschenmesser (for Righties) 3D Printer Model' is (stl) file type, size is 994.0KB.
It s a pocket knife, which I draw just for fun. It s definitely no real weapon!
This version is constructed for right-handed persons.
There is also a version for left-handed persons available.
--> http://www.thingiverse.com/thing:101696
I used a M3x15 cylinder head screw, M3 hex nut and a big M3 washer to joint the bar and the blade.
If you have the possibility you should cut the M3x15 clylinder head screw 2,9mm.
Update:
There is now version 2 available. Version 2 is completely 3d printable and designed by kohlerw and me. That means you don t need any screws or nuts to manufacture it.
Only print the peg and put it in the hole through the blade. If necessary you can use a (small) drop of glue to fix the peg in the holder.
Although, I printed everything in PLA, I think it s better to use ABS or maybe nylon for the holder and the peg.
The knife is still in progress. Let me know your thoughts.
| Messergriff_Rechtshnder_1.1.stl | 3.4MB | |
| Messergriff_Rechtshnder_2.0.stl | 3.0MB | |
| Messergriff_Rechtshnder_Peg_2.0.stl | 1.4MB | |
| Messerklinge_Rechtshnder_1.0_mit_Riffelung.stl | 530.5KB | |
| Messerklinge_Rechtshnder_1.0_ohne_Riffelung.stl | 519.6KB | |
| Messerklinge_Rechtshnder_2.0_mit_Riffelung.stl | 544.5KB |
