V Profile 2040 Switch Box With Converter Mount LM2596 (LED – Light) 3D Printer Model
The file 'V Profile 2040 Switch Box With Converter Mount LM2596 (LED – Light) 3D Printer Model' is (stl) file type, size is 70.2KB.
The file 'V Profile 2040 Switch Box With Converter Mount LM2596 (LED – Light) 3D Printer Model' is (stl) file type, size is 70.2KB.
This is a remix of the switch box for 2040 profile from Vamsidhar https://www.thingiverse.com/thing:3662547
I've added a mount for the LM2596, some holes for ventilation and a separate hole for the cables.
In my project, I've got a 24V power supply, but my LED-bar just needs 12V. Therefore, I've added the LM2596 mount.
You can also decide to use 1, 2 or 3 rocker swithes, for a LED-bar in the front, in the back ant at the nozzle. After printing the holes for the rocker are closed, so you can decide, which one you want to use, open it carefully with a carpet knife or a tool you prefer.
The holes are for rocker switches with the dimension 26mm x 10mm.
See my remixes of a LED-bar:
V1 without locking hooks:
https://www.thingiverse.com/thing:4084145
V2 with locking hooks:
https://www.thingiverse.com/thing:4558711
I've uploaded a version with 4 and 7 ventilation slots, and one without.
The case is has the hight like the 2040 profile, 40mm, so it presses against the horn.
And an additional notice:
The housing cover came off the plate when it was printed, which is why the surface is curved. (The front of the cover was the side on the plate when I was 3D printing it.)
Edit 18.11.2020:
My LM2596 version has the dimensions:
44 x 21,3 mm (length x width)
3 mm hole diameter (for the screws)
| rocker_switch_cover.stl | 11.6KB | |
| rocker_switch_housing.stl | 50.1KB | |
| rocker_switch_housing_4_ventilation_slots.stl | 82.7KB | |
| rocker_switch_housing_7_ventilation_slots.stl | 107.9KB |
