I recommend to print all in PLA. Infill not less than 50% as it has to hold parts together and you need to be able to place screws :D
| Alu_cover.stl | 31.3KB | |
| Bearing_holder.stl | 193.9KB | |
| Gear_nema17.stl | 2.9MB | |
| Main_box_down.stl | 579.7KB | |
| Main_box_down_PCBs.stl | 412.4KB | |
| Main_box_top.stl | 65.1KB | |
| Main_box_under.stl | 82.9KB | |
| Table.stl | 577.2KB |
