UStepper Linear Actuator 3D Printer Model
The file 'UStepper Linear Actuator 3D Printer Model' is (step,stl,scad) file type, size is 277.6KB.
The file 'UStepper Linear Actuator 3D Printer Model' is (step,stl,scad) file type, size is 277.6KB.
Derivative of: http://www.thingiverse.com/thing:45103
This is a compact derivative of the "Linear actuator concept for CNC machines" intended for stand-alone applications using a uStepper. Could be used as window or door opener for example. May be updated at a later point.
Hardware:
2 x 625ZZ bearings
2 x M3x35mm
4 x M3x8mm (or M3x10mm if using washers)
1 x M3x10mm (for the motor gear)
3 x M3 nuts
2 x M5 nuts
1 x M5 threaded rod
2 x M5 washers (if needed between bearings and gear)
A short video can be found here: https://youtu.be/LF4IwXSxZNg
| aktuater_stepper_part1_v1.step | 231.3KB | |
| aktuater_stepper_part2_v1.step | 147.6KB | |
| aktuator_stepper1.stl | 154.0KB | |
| aktuator_stepper2.stl | 100.9KB | |
| motor_gear.stl | 233.0KB | |
| tandhjul.stl | 558.4KB | |
| Y_motor_gear.scad | 3.2KB | |
| Y_rod_floating_gear.scad | 1.8KB |
